Press the left side button to load a track into the active Deck (1 or 3), press the right side button to load a track into the active Deck (2 or 4). Turn to adjust the slope of the crossfader curve, to the left for a smooth fade (mixing) or to the right for a sharp cut (scratching. When the switch is unlit, the cue channel and main mix will be ‘blended’ together. When this switch is lit, the headphone audio will be ‘split’ such that all channels sent to cue channel are summed to mono and sent to the left headphone channel and the main mix is summed to mono and sent to the right channel. Turn to adjust the volume level of the headphones.Īdjusts the software’s audio output to the headphones, mixing between the cue output and the main mix output. Turn to adjust the volume level of the booth outputs. Turn to adjust the volume level of the main outputs. If the volume is set to 0 then the Sampler banks are hidden, otherwise shown. Turn this knob to adjust the volume level of the software’s sampler. Use this crossfader to mix between the left and right decks. Routes the audio playing on the corresponding channel to either side of the crossfader ( A or B), or bypasses the crossfader and sends the audio directly to the program mix ( THRU). Use to adjust the channel’s volume level. Press to send the channel’s pre-fader signal to the headphones’ cue channel. Turn the knob clockwise to apply a high-pass Filter. Turn the knob counterclockwise to apply a low-pass filter. Turn this knob to adjust the filter applied to the channel. Turn to boost or cut the HI, MID and LOW frequencies for the channel.

Turn to adjust the level of the pre-fader, pre-EQ audio signal for the channel.ĭisplay the audio signal level of the channel as in Mixxx GUI. If only one USB Port is connected the controller activates this automatically. Press to select whether the deck is controlling the computer connected to USB Port 1 or USB Port 2. USB will turn the corresponding Deck on and allows to control Mixxx via USB connection.

This allows the mixer to use an external source. LINE/PHONO will disable the corresponding Deck (switches off all LEDs and the controller will not send MIDI signals to control Mixxx).

Set to the desired audio source for this channel.

Denon mc6000 drivers download